Laval & Greater Montreal

Garage Door Opener Installation in Laval & Greater Montreal

Belt, chain and wall-mount openers installed, programmed and safety-tested, sized for your door's weight and headroom.

Laval, North Shore, South Shore, Montreal, West Island, Terrebonne, Mascouche, Rosemère, Blainville, Boisbriand, Sainte-Thérèse, Mirabel, Saint-Eustache, Deux-Montagnes, Bois-des-Filion, Lorraine, Longueuil, Brossard, Saint-Hubert, Saint-Lambert, Boucherville, La Prairie, Candiac, Chambly, Saint-Bruno-de-Montarville, Beloeil, Varennes, Chomedey, Laval-des-Rapides, Pont-Viau, Duvernay, Vimont, Auteuil, Sainte-Rose, Fabreville, Sainte-Dorothée, Laval-Ouest, Saint-François, Saint-Vincent-de-Paul, Saint-Laurent, Ahuntsic-Cartierville, Villeray–Saint-Michel, Rosemont–La Petite-Patrie, Saint-Léonard, Anjou, Montréal-Nord, Mercier–Hochelaga-Maisonneuve, Rivière-des-Prairies, LaSalle, Verdun, Lachine, Côte-des-Neiges–NDG, Le Plateau-Mont-Royal, Outremont, Mont-Royal, Côte-Saint-Luc, Pierrefonds-Roxboro, Dollard-des-Ormeaux, Pointe-Claire, Kirkland, Beaconsfield, Dorval, L'Île-Bizard, Sainte-Anne-de-Bellevue, Baie-d'Urfé
Diagnosed before quoted
Residential & commercial
Emergency calls prioritised
Across Greater Montreal

What we do

Garage Door Opener Installation in Greater Montreal

Choosing an opener is mostly about three things: the weight of the door, how close the garage is to living space, and how much headroom the rail has to share with the door.

Belt drives are the quietest and are worth it under a bedroom. Chain drives are durable and cost less. Wall-mount (jackshaft) units free up ceiling space and suit low-headroom garages and taller doors.

What the job includes

  • Recommend a drive type and horsepower class for your door
  • Remove the old opener and rail
  • Mount the new unit, rail, brackets and safety sensors
  • Wire the wall console and set travel limits and force
  • Program remotes, keypads and vehicle controls
  • Test auto-reverse on contact and on sensor interruption
  • Balance-check the door so the opener is not overloaded

Common problems

What usually goes wrong

These are the failures we are actually called out for, and what each one usually means.

An underpowered opener on a heavy insulated door

Undersized units run hot, strip gears early and struggle in cold weather. Door weight drives the choice.

A chain drive installed under a bedroom

Chain noise transmits through the structure. A belt drive or wall-mount unit is the right answer in that layout.

Not enough headroom for a standard rail

Wall-mount openers remove the rail from the ceiling entirely and are often the cleanest solution in low-headroom garages.

Our process

How the job runs

  1. 1

    Step 1

    Contact AAL Garage Doors and describe what the door is doing.

  2. 2

    Step 2

    A technician diagnoses the door, opener and hardware on site.

  3. 3

    Step 3

    We explain what is wrong, what it takes to fix it and what it costs.

  4. 4

    Step 4

    We complete the work with parts sized for your door.

  5. 5

    Step 5

    We balance, cycle and safety-test the whole system before leaving.

Why AAL

Why homeowners call us back

  • Drive type and power matched to the door and the garage layout
  • Safety reverse tested both ways before we leave
  • Remotes and keypads programmed with you
  • Door balance checked as part of the install

Fastest diagnosis

Send a photo of the problem

A picture of the spring above your door, the opener unit, or the way the door is sitting tells us more in ten seconds than a phone call does in ten minutes. Send one and you get a real assessment — including when the fix is something you can do yourself.

  • The spring bar above the door
  • The opener unit and its model label
  • How the door sits when it stops
  • Any frayed cable near the bottom bracket

Ready when you are

Attach photos straight to the quote form, or send them over WhatsApp if that is easier.

Reviews

Garage Door Opener Installation — what customers say

Jobs like yours, across Laval, Montreal and the surrounding suburbs.

“Opener finally died after about fifteen years. They walked me through belt versus chain given the bedroom sitting right above the garage, installed a belt drive, and set the travel limits properly. You genuinely cannot hear it from upstairs now.”

David R.

Saint-Laurent, Montreal · March 2026

“Spring went on a Sunday morning with the car locked inside and my wife needed to be at work. Sent a photo over WhatsApp, got a straight answer on what it was and what it would cost before anyone drove out. Both springs replaced and the door is quieter than it has been in years.”

Marc-André L.

Chomedey, Laval · February 2026

“Two other companies told me the whole door needed replacing. These guys came out, found a bent track and worn rollers, fixed both, and charged a fraction of what I was quoted elsewhere. Honest is the word I would use.”

Sylvie T.

Sainte-Dorothée, Laval · January 2026

Pricing

What actually drives the price

No two garage door jobs price the same, and any company quoting you a firm number before seeing the door is guessing. Here is what changes the figure — you get the real one after the diagnosis, before any work starts.

JobWhat moves the priceWorth knowing
Torsion spring replacementDoor weight and height, single vs matched pair, spring cycle ratingAlways replaced in pairs on a two-spring door so balance is kept.
Cable replacementWhether drums need re-spooling, condition of the bottom bracketsUsually paired with a balance check, since a snapped cable means the door ran uneven.
Opener repairGear kit vs logic board vs sensors, brand and age of unitA stripped nylon gear is a repair. A failed board on a 15-year-old unit often is not worth it.
Opener replacementChain, belt or wall-mount; horsepower for door weight; accessoriesBelt drive is worth it when there is a bedroom above the garage.
Panel / section replacementAvailability of a matching section, insulated vs non-insulatedHas to be ordered to match — this is the one job that is rarely same-visit.
Full door replacementSize, insulation R-value, window inserts, new tracks and hardwareIncludes correctly sized springs and a re-set opener, not just the door.

Fastest way to a real number: send a photo of the door, the spring above it, or the opener unit. WhatsApp is usually quickest — you often get an assessment back before a technician is dispatched.

FAQ

Garage Door Opener Installation questions

Belt drive or chain drive?

Belt drives are noticeably quieter and are the better choice when there is a bedroom or living space next to or above the garage. Chain drives cost less and last well in detached or unfinished garages.

What about a wall-mount opener?

Wall-mount units are excellent for low-headroom garages, high doors, and when you want the ceiling clear for storage. They also keep the motor away from the door's centre.

Can I keep my old remotes?

Usually not across brands or generations, because rolling-code systems differ. New remotes and a keypad are normally included or supplied with the unit.

Do you install smart openers?

Yes. Units with app control and camera options are installed and set up on your home network at the same visit.

Need Garage Door Opener Installation?

Send a photo of the problem and we will tell you what it actually needs — often before a technician is dispatched.

Laval • Montreal • North Shore • South Shore • West Island