Laval & Greater Montreal

Garage Door Track Repair in Laval & Greater Montreal

Bent, loose or misaligned tracks straightened, realigned or replaced so the door runs true and quietly.

Laval, North Shore, South Shore, Montreal, West Island, Terrebonne, Mascouche, Rosemère, Blainville, Boisbriand, Sainte-Thérèse, Mirabel, Saint-Eustache, Deux-Montagnes, Bois-des-Filion, Lorraine, Longueuil, Brossard, Saint-Hubert, Saint-Lambert, Boucherville, La Prairie, Candiac, Chambly, Saint-Bruno-de-Montarville, Beloeil, Varennes, Chomedey, Laval-des-Rapides, Pont-Viau, Duvernay, Vimont, Auteuil, Sainte-Rose, Fabreville, Sainte-Dorothée, Laval-Ouest, Saint-François, Saint-Vincent-de-Paul, Saint-Laurent, Ahuntsic-Cartierville, Villeray–Saint-Michel, Rosemont–La Petite-Patrie, Saint-Léonard, Anjou, Montréal-Nord, Mercier–Hochelaga-Maisonneuve, Rivière-des-Prairies, LaSalle, Verdun, Lachine, Côte-des-Neiges–NDG, Le Plateau-Mont-Royal, Outremont, Mont-Royal, Côte-Saint-Luc, Pierrefonds-Roxboro, Dollard-des-Ormeaux, Pointe-Claire, Kirkland, Beaconsfield, Dorval, L'Île-Bizard, Sainte-Anne-de-Bellevue, Baie-d'Urfé
Diagnosed before quoted
Residential & commercial
Emergency calls prioritised
Across Greater Montreal

What we do

Garage Door Track Repair in Greater Montreal

The track keeps the door on a controlled path. When it is bent, spread or loose on its brackets, the rollers bind, the door shudders, and the opener works harder than it should.

Track problems rarely happen alone: they follow an impact, a cable failure, or years of loose lag bolts and shifting framing.

What the job includes

  • Straighten minor bends and replace sections too damaged to true
  • Re-align vertical and horizontal track and correct the spacing
  • Tighten or replace loose track brackets and lag fasteners
  • Replace worn rollers that have been chewing the track
  • Re-check door travel, balance and opener settings

Common problems

What usually goes wrong

These are the failures we are actually called out for, and what each one usually means.

The door shudders or catches at the same point every time

A localized bend or a bracket that has shifted. The door hits the same defect on every cycle.

The door came off the track

Usually caused by an impact, a broken cable, or rollers worn enough to jump the rail. It needs to be re-set properly, not forced back in.

A wide gap between the door and the track

Spread track lets rollers walk out of the channel. Correcting the spacing is what prevents a derailment.

Our process

How the job runs

  1. 1

    Step 1

    Contact AAL Garage Doors and describe what the door is doing.

  2. 2

    Step 2

    A technician diagnoses the door, opener and hardware on site.

  3. 3

    Step 3

    We explain what is wrong, what it takes to fix it and what it costs.

  4. 4

    Step 4

    We complete the work with parts sized for your door.

  5. 5

    Step 5

    We balance, cycle and safety-test the whole system before leaving.

Why AAL

Why homeowners call us back

  • Tracks trued and re-aligned rather than patched
  • Rollers and hinges inspected in the same visit
  • Full travel and safety re-test before we finish

Fastest diagnosis

Send a photo of the problem

A picture of the spring above your door, the opener unit, or the way the door is sitting tells us more in ten seconds than a phone call does in ten minutes. Send one and you get a real assessment — including when the fix is something you can do yourself.

  • The spring bar above the door
  • The opener unit and its model label
  • How the door sits when it stops
  • Any frayed cable near the bottom bracket

Ready when you are

Attach photos straight to the quote form, or send them over WhatsApp if that is easier.

Reviews

Garage Door Track Repair — what customers say

Jobs like yours, across Laval, Montreal and the surrounding suburbs.

“Two other companies told me the whole door needed replacing. These guys came out, found a bent track and worn rollers, fixed both, and charged a fraction of what I was quoted elsewhere. Honest is the word I would use.”

Sylvie T.

Sainte-Dorothée, Laval · January 2026

“Spring went on a Sunday morning with the car locked inside and my wife needed to be at work. Sent a photo over WhatsApp, got a straight answer on what it was and what it would cost before anyone drove out. Both springs replaced and the door is quieter than it has been in years.”

Marc-André L.

Chomedey, Laval · February 2026

“Opener finally died after about fifteen years. They walked me through belt versus chain given the bedroom sitting right above the garage, installed a belt drive, and set the travel limits properly. You genuinely cannot hear it from upstairs now.”

David R.

Saint-Laurent, Montreal · March 2026

Pricing

What actually drives the price

No two garage door jobs price the same, and any company quoting you a firm number before seeing the door is guessing. Here is what changes the figure — you get the real one after the diagnosis, before any work starts.

JobWhat moves the priceWorth knowing
Torsion spring replacementDoor weight and height, single vs matched pair, spring cycle ratingAlways replaced in pairs on a two-spring door so balance is kept.
Cable replacementWhether drums need re-spooling, condition of the bottom bracketsUsually paired with a balance check, since a snapped cable means the door ran uneven.
Opener repairGear kit vs logic board vs sensors, brand and age of unitA stripped nylon gear is a repair. A failed board on a 15-year-old unit often is not worth it.
Opener replacementChain, belt or wall-mount; horsepower for door weight; accessoriesBelt drive is worth it when there is a bedroom above the garage.
Panel / section replacementAvailability of a matching section, insulated vs non-insulatedHas to be ordered to match — this is the one job that is rarely same-visit.
Full door replacementSize, insulation R-value, window inserts, new tracks and hardwareIncludes correctly sized springs and a re-set opener, not just the door.

Fastest way to a real number: send a photo of the door, the spring above it, or the opener unit. WhatsApp is usually quickest — you often get an assessment back before a technician is dispatched.

FAQ

Garage Door Track Repair questions

Can a bent track be repaired or does it need replacing?

Light bends in otherwise sound track can often be straightened. Kinked, crushed or corroded sections are replaced, because a compromised track will keep damaging rollers.

My door came off the track — can I put it back myself?

We do not recommend it. A derailed door is usually still under spring tension and can drop or bind badly. Leave it and call for service.

Why is my door suddenly noisy?

Worn rollers and dry hinges are the usual cause, and misaligned track is next. All three are addressed during a track and hardware service.

Need Garage Door Track Repair?

Send a photo of the problem and we will tell you what it actually needs — often before a technician is dispatched.

Laval • Montreal • North Shore • South Shore • West Island