Laval & Greater Montreal

Garage Door Tune-Up in Laval & Greater Montreal

A focused visit to make a working-but-rough door run smoothly again: balance, hardware, lubrication and opener settings.

Laval, North Shore, South Shore, Montreal, West Island, Terrebonne, Mascouche, Rosemère, Blainville, Boisbriand, Sainte-Thérèse, Mirabel, Saint-Eustache, Deux-Montagnes, Bois-des-Filion, Lorraine, Longueuil, Brossard, Saint-Hubert, Saint-Lambert, Boucherville, La Prairie, Candiac, Chambly, Saint-Bruno-de-Montarville, Beloeil, Varennes, Chomedey, Laval-des-Rapides, Pont-Viau, Duvernay, Vimont, Auteuil, Sainte-Rose, Fabreville, Sainte-Dorothée, Laval-Ouest, Saint-François, Saint-Vincent-de-Paul, Saint-Laurent, Ahuntsic-Cartierville, Villeray–Saint-Michel, Rosemont–La Petite-Patrie, Saint-Léonard, Anjou, Montréal-Nord, Mercier–Hochelaga-Maisonneuve, Rivière-des-Prairies, LaSalle, Verdun, Lachine, Côte-des-Neiges–NDG, Le Plateau-Mont-Royal, Outremont, Mont-Royal, Côte-Saint-Luc, Pierrefonds-Roxboro, Dollard-des-Ormeaux, Pointe-Claire, Kirkland, Beaconsfield, Dorval, L'Île-Bizard, Sainte-Anne-de-Bellevue, Baie-d'Urfé
Diagnosed before quoted
Residential & commercial
Emergency calls prioritised
Across Greater Montreal

What we do

Garage Door Tune-Up in Greater Montreal

A tune-up is for a door that still works but has become loud, jerky or slow. Nothing has failed yet — the system has simply drifted out of adjustment.

We correct spring balance, tighten and lubricate the hardware, and re-set the opener's travel and force so the door runs the way it did when it was new.

What the job includes

  • Adjust spring tension to restore hand balance
  • Tighten all hinges, brackets and track hardware
  • Lubricate hinges, rollers, springs and rail
  • Re-set opener travel limits and force settings
  • Align safety sensors and test both reverse systems
  • Flag worn rollers, cables or seals for replacement

Common problems

What usually goes wrong

These are the failures we are actually called out for, and what each one usually means.

The door has become slow and noisy

Dry hardware and drifting force settings. A tune-up usually restores smooth travel without new parts.

The door bounces at the floor

Close limit or down-force set wrong. Adjusting it stops the bounce and the reversal.

The opener sounds like it is struggling

Spring tension has relaxed and the opener is carrying weight it should not. Re-tensioning fixes the cause.

Our process

How the job runs

  1. 1

    Step 1

    Contact AAL Garage Doors and describe what the door is doing.

  2. 2

    Step 2

    A technician diagnoses the door, opener and hardware on site.

  3. 3

    Step 3

    We explain what is wrong, what it takes to fix it and what it costs.

  4. 4

    Step 4

    We complete the work with parts sized for your door.

  5. 5

    Step 5

    We balance, cycle and safety-test the whole system before leaving.

Why AAL

Why homeowners call us back

  • Adjustment first, parts only when needed
  • Springs, hardware and opener treated as one system
  • Safety tests included

Fastest diagnosis

Send a photo of the problem

A picture of the spring above your door, the opener unit, or the way the door is sitting tells us more in ten seconds than a phone call does in ten minutes. Send one and you get a real assessment — including when the fix is something you can do yourself.

  • The spring bar above the door
  • The opener unit and its model label
  • How the door sits when it stops
  • Any frayed cable near the bottom bracket

Ready when you are

Attach photos straight to the quote form, or send them over WhatsApp if that is easier.

Reviews

Garage Door Tune-Up — what customers say

Jobs like yours, across Laval, Montreal and the surrounding suburbs.

“Spring went on a Sunday morning with the car locked inside and my wife needed to be at work. Sent a photo over WhatsApp, got a straight answer on what it was and what it would cost before anyone drove out. Both springs replaced and the door is quieter than it has been in years.”

Marc-André L.

Chomedey, Laval · February 2026

“Two other companies told me the whole door needed replacing. These guys came out, found a bent track and worn rollers, fixed both, and charged a fraction of what I was quoted elsewhere. Honest is the word I would use.”

Sylvie T.

Sainte-Dorothée, Laval · January 2026

“Opener finally died after about fifteen years. They walked me through belt versus chain given the bedroom sitting right above the garage, installed a belt drive, and set the travel limits properly. You genuinely cannot hear it from upstairs now.”

David R.

Saint-Laurent, Montreal · March 2026

Pricing

What actually drives the price

No two garage door jobs price the same, and any company quoting you a firm number before seeing the door is guessing. Here is what changes the figure — you get the real one after the diagnosis, before any work starts.

JobWhat moves the priceWorth knowing
Torsion spring replacementDoor weight and height, single vs matched pair, spring cycle ratingAlways replaced in pairs on a two-spring door so balance is kept.
Cable replacementWhether drums need re-spooling, condition of the bottom bracketsUsually paired with a balance check, since a snapped cable means the door ran uneven.
Opener repairGear kit vs logic board vs sensors, brand and age of unitA stripped nylon gear is a repair. A failed board on a 15-year-old unit often is not worth it.
Opener replacementChain, belt or wall-mount; horsepower for door weight; accessoriesBelt drive is worth it when there is a bedroom above the garage.
Panel / section replacementAvailability of a matching section, insulated vs non-insulatedHas to be ordered to match — this is the one job that is rarely same-visit.
Full door replacementSize, insulation R-value, window inserts, new tracks and hardwareIncludes correctly sized springs and a re-set opener, not just the door.

Fastest way to a real number: send a photo of the door, the spring above it, or the opener unit. WhatsApp is usually quickest — you often get an assessment back before a technician is dispatched.

FAQ

Garage Door Tune-Up questions

What is the difference between a tune-up and maintenance?

Maintenance is the scheduled annual inspection and service. A tune-up is called in response to a specific complaint — noise, roughness or slow travel — and focuses on correcting adjustment.

Will a tune-up fix a noisy door?

Usually a large part of it. If the rollers are already seized or flat-spotted, replacing them is what finishes the job.

How long does it take?

Typically about an hour for a standard residential door, longer if parts need replacing.

Need Garage Door Tune-Up?

Send a photo of the problem and we will tell you what it actually needs — often before a technician is dispatched.

Laval • Montreal • North Shore • South Shore • West Island